Souriau > Clipper
clipper-waterpr

Clipper: Waterproof

Description

Plastic low cost industrial connector.

Specifications

  • retention plate system allowing insertion/extraction of the contacts without tooling
  • waterproof when immersed at depths down to 30 meters (IP68)
  • 4 sizes of shells
  • 7 contact layouts
  • crimp or solder contacts, machined or stamped and formed
souriau logo

Mechanical Characteristics

  • Monobloc shell and insulator in thermoplastic material self extinguishing
    to UL 94 V0.
  • 180° screw coupling with positive audible safety latch.
  • Scoop proof.
  • Copper alloy contacts, machined or stamped and formed
  • plating : gold on active part over nickel.
  • Mechanical endurance :
    • connector : 250 cycles mating / unmating,
    • retention plate : 50 cycles mating / unmating.
  • Retention force :
    • # 20 -- 70 N
    • # 16 -- 90 N.
  • Vibration :
    • frequency range : 10-2000 Hz, 20 g
    • 10 cycles in accordance with CEI 68-2-6

Electrical Characteristics

  • Withstand voltage : 1500 Vrms min or in accordance with DIN 57110b.
  • Contact resistance < 10 mΩ.
  • Current rating per contact : machined contacts : 
    • # 20 (7 Amps), 
    • # 16 (13 Amps)
  • stamped and formed contacts : 
    • # 20 (5 Amps), 
    • # 16 (10 Amps).

Environmental Characteristics

  • Sealing : up to IP68
  • Working temperature : 40°C to +125°C. (-40°F to +257°F)
  • Resistance to salt spray :
    • 48 h min
    • > 1000 h (sealed mated connectors).

Resistance to fluids

  • oil,
  • petrol, fuel,
  • lubricants
  • other fluids : consult FCI.

Presentation

CLIPPER is a plastic low cost range of industrial connectors, UL & CSA approved.

Complementing FCI product range
CLIPPER offers :

  • a high sealing level :
    • IP67 for the sealed plug (with o'ring and mating seal)
    • IP68 for the enhanced sealed plug (with o'ring and a special mating seal).
      This version allows a permanent waterproof level when immersed at depths down to 30 meters.
  • a retention plate system allowing insertion/extraction of the contacts without the need for tooling, facilities to use trade backshells with the electrical thread adaptor (PG).
  • facilities to use trade backshells with the electrical thread adaptor
    (PG).

CLIPPER range is composed of :

  • 4 sizes of shell in molded black thermoplastic material (size 1/2/3/4).
  • 7 contact layouts (4/9/14/18/26/31/40 contacts).
  • #20, #16 contacts, machined or stamped and formed, crimp,solder or PC tail termination.
  • An adaptor with electrical PG thread for PG backshells.Backnut with grommet facilities
 
quick